Cast boolit mould for 375jdj

[221fireball]

Is anyone out there casting bullets for 375 JDJ

[bosterr]

A friend and I went together to design and buy an Accurate Molds 38-275B for our Contender barrels. His is a TC Custom Shop 14 inch and mine is a SSK Industries 14 inch barrel. His didn't do well with it at all. Mine shows a lot of promise at 100 yds. with IMR4198. I'm waiting for spring to arrive to continue testing. We tried the Lee 379-250RF and it did poorly with both barrels. I'll probably end up selling it.

[rush1886]

Take a look at Tom's (Accurate Molds) 38 265D. It should be dyn-o-mite!

It is quite similar, profile wise, to the one I had LBT build for me.

[221fireball]

Thanks a lot I'll try that

[221fireball]

I think this is the one for me really aprecate it I'm going to order one now

[220]

Not A JDJ but have had good results with a NOE 378-275 GC HP from a H&H.
Settled on a load with AR2207 (H4198) pushing them at a bit over 1800fps, averaging 1.5moa for 3 shots over numerous groups.

[jimofaz]

"NOE 378-275 GC HP"

+1

Great Cast Boolit Mould for the .375 JDJ
Jim