PDA

View Full Version : 310 Tools again?


shooter93
04-20-2008, 08:41 PM
Do the Tru-line dies fir the 310 tool? Thanks.
floodgate
04-20-2008, 09:01 PM
Shooter 93:

Generally speaking, yes; except that those marked "CMR" (combination muzzle resizer/decapper/expander) or "FL" (full-length sizing for pistol and short rifle cases) in the later Tru-Line Jr. sets may require more travel or force than the 310 provides. Also, you won't have the re-priming die needed for the 310. (Of course, if you use - as I generally do - a Lee or RCBS hand priming tool, that is not a problem). You will also need the correct case-head adapter bushing to screw into the 310 from the inside, or the cases may not line up properly. Going the other way, the 310 dies work fine in the Tru-Line Jrs., as that was what the presses were originally designed for.

Floodgate