44 mag 335 lfn pb load data needed

[30hrrtt]

I have some 335 grain plain base bullets from Beartooth Bullets. Anybody have any load data for it or one close to it in plain base?

[beagle]

Hit on Hodgdon's site. They have pressure tested dat for all weights of bullets. I've used alot of their data in the past and found it good./beagle

[30hrrtt]

My bullets are plain base. The bullets at Hodgdon are gas checked. About where would I start a starting load compared to their data?

[beagle]

Use their starting load and work up. Unless you're really pushing the velocity envelope, the GC won't make any difference.

If your bullets are of a sufficient diameter for your chamber you shouldn't experience leading.

Rule of thumb is that you can get away with more pressure with a PB bullet than a GC. Same as you can get away with more pressure with a cast bullet than you can a jacketed. Less friction./beagle