Need two top punch numbers

[selmerfan]

I have a Saeco #354 mold and Lyman/Lee 6 cav #358627 mold coming. I need top punch numbers for these two molds if you would be so gracious as to share for a newbie. If it makes a difference, I'm using a Lyman 4500 sizer.
Thanks!!!
Selmerfan

[NVcurmudgeon]

Easy! Both boolits have flat points. You can use any top punch for a flat pointed boolit that doesn't put a ring around the nose of the boolit. Or you can make a punch from a bolt that has threads that don't run all the way up to the head. If the end of the punch must enter the sizing die, it's easy to turn it down with a grinder or a file and electric drill.