In need of a specific mold ... so far, no luck.

[Fuzzy1]

Doing a little searching for a friend, and if anyone can help ... I know it's one of you guys in here.

He is searching for a mold ... .45cal ... 250-255 gr. ... gas check ... wide nose for feeding & function in a lever gun.

Any idea if this exists ??? He is capable of making a mold if absolutely necessary, but would rather buy off the shelf.

thanx for looking ... ... ...

<<<__ Fuzzy1 __>>>

[Cowboy_Dan]

Contact Tom at Accurate Molds. He can make anything, so long as it has a minimum meplat. He may even already make that design. Also don't forget NOE, they just may already make what you're looking for.

[runfiverun]

wide nose I'm taking to mean a round nose flat point.
the lyman 452664 is right there with what you want.
except for the gas check part, which I have never found necessary in my lever guns even when exceeding 1600 fps.
he could always look into a plain base gas check which is installed when sizing like a regular check.
but when he finds out he don't need one he has the option of just not using it and can still keep the flat base.

[rr2241tx]

I have had good results with an original Lyman 454424 which is now obsolete. You can get that bullet here: http://noebulletmolds.com/NV/product_info.php?products_id=450. My rifle would not shoot any kind of round nose bullet but is very accurate with this one.

[Fuzzy1]

Thanx so much guys ... I found a few in there that look to be exactly what he has in mind, and I forwarded the links to him. Again .. thanx so much ... ... ... if there are any others, let me know and I will forward them as well.

[JonB_in_Glencoe]

Doing a little searching for a friend, and if anyone can help ... I know it's one of you guys in here.

He is searching for a mold ... .45cal ... 250-255 gr. ... gas check ... wide nose for feeding & function in a lever gun.

Any idea if this exists ??? He is capable of making a mold if absolutely necessary, but would rather buy off the shelf.

thanx for looking ... ... ...

<<<__ Fuzzy1 __>>>
yur a bit fuzzy (pun intended) on which caliber ?

But, I suspect 45 colt.
NOE is out of stock with this one, but email him, and I bet he may run a batch if you commit to ordering one.
http://noebulletmolds.com/NV/product_info.php?cPath=41&products_id=746&osCsid=gkjbbb16ikior3pqo43ieuvbr7

[Djones]

Another NOE option:

http://noebulletmolds.com/NV/product_info.php?cPath=41&products_id=1624