stubert
07-06-2015, 01:26 PM
I am loading for a Marlin Guide gun, I have an RCBS 45-405 mold that I had hollowpointed. It weighs 415 without the pin in, with the pin in it weighs 390. I am wanting to sell it and go down to a 350 gr. mold. The 415 and 390 grn. are a bit much for the 160 lb deer we have here, they also kick a bit. I am wondering if the NOE 350 grain is as accurate. It would be less stressful on the shoulder to. There can't be alot of animals that a 350 cast @ 1700-1800 wouldn't dispatch cleanly. Also, how hard are 4 cav. brass molds to use? I have only cast with 2 cav. in the past. Will Lyman or RCBS handles fit? Any tips or advice are welcome. Thanks in advance, Stu