Power Pistol in .45-70

[tinhorn97062]

I see tons of load data for using Unique, for reduced power loads, but virtually nothing for Power Pistol. Looking at the burn rates, they're very close to each other. Is there anybody that is using/has used Alliant Power Pistol in a .45-70? I happen to have an abundance of it and was considering working on some loads with it.

[44MAG#1]

I haven't but I am going to in a 45/70 with 515 gr cast pretty soon.

[runfiverun]

I have no power pistol here.
but looking at it some and talking to others that have used the powder I wouldn't hesitate to use unique data with it.

[tinhorn97062]

Thank you sir...I believe I will!

[Michael J. Spangler]

Bringing this one back from the dead.

Anyone have luck with this?

[fredj338]

I used to load 300gr over 8gr f unique with a dacron over power for CAS back n the beginning.

[Michael J. Spangler]

I’ll have to ask a buddy to run it through quickoad. Then ask him to run the loads through his rifle first ��

[Gobeyond]

Find out if the PP is position sensitive.