I need to get updated on alloy to bring dead soft lead up to hardness

[JBMauser]

I put my casting pot into retirement a few years ago. I followed other endeavors.
getting geared up to cast for a 300 blackout I am building. I went to look to Antimony Man for tin and antimony and found he is out of business and in sadly in distress.

I used the wayback machine to pull up his website from 2014 and copied off the rich material he had posted for reference. Has anyone risen to fill the void he left? Is there a source for material to add to soft lead to bring up the hardness?

Getting back on board, slowly it seems. Still have a bucket of Wheel weights. But a few buckets of dead soft lead. I need a plan. thanks in advance. JB

[alfloyd]

Try Rotometals, they are a sponsor here on this site.
Click on the add at the top of the page or go here:
http://www.rotometals.com/Bullet-Casting-Alloys-s/5.htm

Lafaun

[Litl Red 3991]

Rotometals for tin. For better prices on lead and premixed Pb/Sn alloys try ZipMetals http://www.zipmetals.com/message.asp?msg=49

[Shiloh]

Click on the link:

This Article in PDF

http://www.lasc.us/CastBulletAlloy.htm

SHiloh