That Lee 124gr .356 TL just ROCKS!

[armoredman]

Loaded that puppy up with a wheel weight alloy, on top of 6.4gr of AA#7, and proceded to vaporize the (almost) center of the target. Admittedly, only at 10 yards, but that was going DA with every shot, decocking to practice that all important first round. Of course, not every round went into the one hole, (When I get my camera back, I'll show ya), but 8 out of 14 made a nice ragged quarter sized hole, and the other 6 weren't that far away.
Casting for 9mm is turning out to be just as much fun as casting for 38! :Fire::drinks:

[jonk]

I'll have to try AA7 as it doesn't do well in my guns with the powder at hand.

[IcerUSA]

So far I like Power Pistol in the 9mm but it is temp sensitive so I use Titegroup , but when it's warm outside it sure made that little Lee boolit do it's stuff . :) I got some 7 also so I just might have to give it a try myself .

Keith

[armoredman]

I've used AA#2,5, and 7 in my CZs, and #7 seems to work extremely well with every bullet I have tried, cast or J-word. Good stuff!