View Full Version : .222 Remington neck reamer?

Avery Arms
02-12-2015, 08:26 PM
Does anyone know where I can find an RCBS .222 neck reamer or any other reamer that will work with an RCBS reaming die?

02-12-2015, 08:50 PM

Look here

02-12-2015, 11:01 PM
The correct reamer has a round shank to guide the reamer.
They are so expensive that a neck turning tool is more practical.

The neck turner will turn almost any case and is adjustable.

ray h
02-13-2015, 10:27 AM
I've only reamed necks for the 357 Auto mag using the rcbs form dies. But the run out was greater than what I got from neck turning. I'm guessing even with a snug fitting reamer shank the cutter is following the crooked hole in the case neck.