Waiting for my RCBS 32-170-FN

[ohland]

Finally had enough futzing about and dropped hammer on a 32-170-FN mold. It is my last reasonable hope to get a re-lined 32-40 to be well-behaved. Tried .321 and .323 sizing, not enough. Barrel slugged @ .316 for bore and @ .322 for groove.

[rintinglen]

Try the 323-470-It works well in an old Marlin that disliked every other boolit I fed it.

[ohland]

Try the 323-470-It works well in an old Marlin that disliked every other boolit I fed it.

I assume you mean the Lyman 323470? Yup, that has crossed my attention... Also, RCBS did / does make the 08-170-FN bigger brother to the 32-170-FN. All in time.

[BrianL]

I just got the RCBS 32-170 and it drops at .323 and are by far the roundest bullets right out of the mold that I have seen. I did have one minor complaint. The sprue-plate is stamped and had a substantial bevel in the bad direction, making it impossible to remove the sprue. A little file work and sprue hole polishing smartened it right up.

[ohland]

Amazon said Sunday by 8PM, and it was here about 2PM. Looks nice, got to wash it out with denatured alcohol, smoke it, and cast.

Sunday delivery. Day-um!

:awesome:

[BrianL]

You will love it, enjoy