PDA

View Full Version : So I am thinking of selling my box of angles



Smoke4320
01-19-2015, 04:41 PM
So I am thinking of selling my box of angles

2 Minutes of angle $49.95
3 Minutes of angle $59.95

I will combine a 2 and a 3 for $79.95

-2 Minutes of angle $69.95
-3 Minutes of angle $79.95

Combine a 2 and a -2 minute of angle and get a 1 hole group

Thoughts

Certaindeaf
01-19-2015, 04:42 PM
I really adored that show "touched by an angle".. quite oblique.

Smoke4320
01-19-2015, 04:49 PM
I really adored that show "touched by an angle".. quite oblique.
yes at the time I thought Roma was really Acute :)
At least she was not a Curt Angle

7br
01-19-2015, 05:08 PM
I thought about buying an angle for a minute, but I had second thoughts

Smoke4320
01-19-2015, 05:12 PM
I would rethink that .. never know when you will need a supplementary angle

aspangler
01-19-2015, 05:16 PM
Anybody got any spare hip waders? :kidding:

Smoke4320
01-19-2015, 05:19 PM
Why are you an Angler ?

Certaindeaf
01-19-2015, 05:20 PM
I thought about buying an angle for a minute, but I had second thoughts
I secant that.

skeettx
01-19-2015, 05:27 PM
Will angle worms be included?

Mike

crawfobj
01-19-2015, 05:31 PM
Gag. You guys are so obtuse.

labradigger1
01-19-2015, 05:34 PM
Trade you some laser ink

William Yanda
01-19-2015, 05:35 PM
Not sure angles meet the requirements for swapping and selling. Will a mod please advise whether or not they meet the criteria?

backhoe
01-19-2015, 05:45 PM
I have half a five gallon bucket full of heavy trigger pulls, trade or sale by the pound.

castalott
01-19-2015, 05:56 PM
I'll take the square root of - 1 moa angles please.....and what kind of a Pro tracter is it that measures these angles? Does it come with a bush hog?

Smoke4320
01-19-2015, 05:56 PM
I have half a five gallon bucket full of heavy trigger pulls, trade or sale by the pound.
If its the top half of the bucket I just might be interested

Smoke4320
01-19-2015, 06:09 PM
I'll take the square root of - 1 moa angles please.....and what kind of a Pro tracter is it that measures these angles? Does it come with a bush hog?

I might be talked into including a hog hammer for a small addition fee

Wolfer
01-19-2015, 06:17 PM
Why do these bargains always come along when I'm broke. Oh wait, I'm always broke!

gwpercle
01-19-2015, 06:24 PM
One of my favorite movies is Band Of Angles, 1957, Clark 45 Degree Gable.
Gary

William Yanda
01-19-2015, 06:29 PM
You keep angles in a box? For shame, everyone knows angles should be kept on a protractor.

Wialco
01-19-2015, 06:46 PM
Does each angle come with its own hypotenuse?

Smoke4320
01-19-2015, 06:49 PM
Trade you some laser ink

if you have 3500 NM laser ink lets talk

castalott
01-19-2015, 06:51 PM
One of my favorite girl groups is the B angles....they sang 'walk like an Egyptian' And since I live in Little Egypt ( really I do...look it up) walking like an Egyptian involves the 100 yard mosey....I am world record holder at 6.35 minutes of angle.....

castalott
01-19-2015, 06:54 PM
Each angle has a high potted moose included? wow!

butch2570
01-19-2015, 06:59 PM
what's the angle differential between a low potted moose and a high potted moose?

ballistim
01-19-2015, 07:03 PM
... is this the thread about someone selling angle iron? Oops! wrong thread.. selling boxes of angling stuff? No! I get it, angles on how to sell boxes...no, wait....

Smoke4320
01-19-2015, 07:07 PM
... is this the thread about someone selling angle iron? Oops! wrong thread.. selling boxes of angling stuff? No! I get it, angles on how to sell boxes...no, wait....

I did have a discussion with an engineer once about what angles you can iron

his answer was the Missis had all the angles covered on ironing

ballistim
01-19-2015, 07:08 PM
I did have a discussion with an engineer once about what angles you can iron

Aha! I KNEW I saw a thread about angles & irons!

Light attack
01-19-2015, 07:12 PM
With these included angles could I measure a used post hole?

Smoke4320
01-19-2015, 07:13 PM
Each angle has a high potted moose included? wow!

Read.. read !!!! it said a can of hot potted MEAT

castalott
01-19-2015, 07:13 PM
every missus I ever retained knew all the angles....believe you me....

castalott
01-19-2015, 07:17 PM
The last one could have wrote the book on geometry.....

castalott
01-19-2015, 07:44 PM
what's the angle differential between a low potted moose and a high potted moose?

Your low potted moose is on depressants and your high potted moose is on something else entirely...

CastingFool
01-19-2015, 07:58 PM
Not sure angles meet the requirements for swapping and selling. Will a mod please advise whether or not they meet the criteria?

Only if they are complimentary angles.

hithard
01-19-2015, 08:04 PM
being an electrician I clearly would have no use for Angle's, but if you come across a bag of Ohm's I have an apprentice that is still looking for some.

RED333
01-19-2015, 08:25 PM
So I am thinking of selling my box of angles

2 Minutes of angle $49.95
3 Minutes of angle $59.95

I will combine a 2 and a 3 for $79.95

-2 Minutes of angle $69.95
-3 Minutes of angle $79.95

Combine a 2 and a -2 minute of angle and get a 1 hole group

Thoughts

Do you have enough of these so i can shoot in a circle, say 360*?

butch2570
01-19-2015, 08:40 PM
Do you have enough of these so i can shoot in a circle, say 360*? If you divide by 3.14 and add one ohm and subtract the depressed moose it should come out about right- L .

crawfobj
01-19-2015, 08:49 PM
I have some extra cylinder throats I could trade. I also have a pile of original VW beetle water pumps.

**oneshot**
01-19-2015, 08:59 PM
Are these different angles or the ones you need a degree to use?

Wialco
01-19-2015, 09:00 PM
I believe the a"cute" angles are the females of the species and the obtuse are the males.

Wialco
01-19-2015, 09:02 PM
You'll need a protracted degree for these angles!

castalott
01-19-2015, 09:04 PM
Do you have enough of these so i can shoot in a circle, say 360*?

Some political parties shoot in a circle facing in but facing out is way safer...and Frisbees are the only safe way to throw circles...and speaking of circuses, I ran away to one once to become a clown but was rejected as I was overqualified......

Certaindeaf
01-19-2015, 09:04 PM
I like the cut of your ogive.

Wialco
01-19-2015, 09:10 PM
Will these angles work in a "ray"dian gun?

castalott
01-19-2015, 09:26 PM
You have to know about grad-u-ations to use these angles....

Smoke4320
01-19-2015, 09:51 PM
Will these angles work in a "ray"dian gun?
Please don't try to lead this thread on a tangent

Blacksmith
01-19-2015, 10:03 PM
This thread should be merged with the Loobe Groves for sale thread. I always thought it was called the Hippopotomoose which is equal to the squire root of the some of the squires of the adjudicated slides or some such thing.

Wialco
01-19-2015, 10:08 PM
I'll cosign that.

Hogtamer
01-19-2015, 10:41 PM
Need pics please, to make sure none have been rect.

montana_charlie
01-19-2015, 10:42 PM
Does each angle come with its own hypotenuse?
No, but each comes with a post hypotenuse suggestion.

mozeppa
01-19-2015, 10:54 PM
this thread has gone off in a tangent.

mozeppa
01-19-2015, 10:55 PM
No, but each comes with a post hypotenuse suggestion.

i have a lead-pot-in-use ...do that count?

Garyshome
01-19-2015, 11:01 PM
I have about 60 post holes for sale from a fence I removed over the weekend.

Smoke4320
01-19-2015, 11:24 PM
I have about 60 post holes for sale from a fence I removed over the weekend.

If you ship them horizontally I need to lay a tunnel

fast ronnie
01-19-2015, 11:27 PM
Does anybody have a bucket of prop pitch they would like sell or maybe donate? This seems to be going in circles anyway!!!

CastingFool
01-19-2015, 11:30 PM
No prop pitch but I have two 5 gallon buckets of free prop wash, and a 75' length of flightline. Any takers?

Certaindeaf
01-19-2015, 11:32 PM
Celsius is really just a plot to trick us into thinking we're not being slowly boiled like that poor frog, degree by degree.

ballistim
01-19-2015, 11:33 PM
No prop pitch but I have two 5 gallon buckets of free prop wash, and a 75' length of flightline. Any takers?

Even swap for a box full of muffler bearings?

dragonrider
01-19-2015, 11:36 PM
I went to a concert once and there was some hipotinuse

scarry scarney
01-19-2015, 11:37 PM
How about a gallon of jet wash for a dozen muffler bearings?

fast ronnie
01-19-2015, 11:41 PM
I would be willing to trade a medium flat rate box of empty post holes for a small flat rate rate box miniature tapped holes.

JonB_in_Glencoe
01-19-2015, 11:45 PM
being an electrician I clearly would have no use for Angle's, but if you come across a bag of Ohm's I have an apprentice that is still looking for some.
Here's a full hour of Om's
https://www.youtube.com/watch?v=ZBgYywcIoTY

Certaindeaf
01-19-2015, 11:48 PM
Patrick McManus would be proud of us.

waksupi
01-20-2015, 12:21 AM
I figure the OP has an angle he is working on, but I haven't figured it out yet.

retread
01-20-2015, 12:25 AM
Just a minute guys! Just what is your angle???

ballistim
01-20-2015, 12:32 AM
How about a gallon of jet wash for a dozen muffler bearings?

Muffler bearings no longer available, pending trade, will let you know if it falls through.

Three44s
01-20-2015, 12:37 AM
From the looks of things, there is a lot of cabin fever going around in this thread!

(I already sold my book of Snipe Hunt tickets or I'd offer them for sale here to take the edge off things ........ so to speak)

Three 44s

Minerat
01-20-2015, 12:40 AM
being an electrician I clearly would have no use for Angle's, but if you come across a bag of Ohm's I have an apprentice that is still looking for some.

Watt would he use them for?

crawfobj
01-20-2015, 12:50 AM
Even swap for a box full of muffler bearings?

I could use some muffler bearings! I have a couple gallons of blinker fluid I could trade.

(True story... Once had a guy ask me if he was going to be out of gas because he left his lights on. SMH!)

ballistim
01-20-2015, 01:17 AM
I worked at the counter of a tire store a long time ago, guy comes in for tires, when I asked what car he had he says "ghoulie" I say what? He says "ghoulie" I walked out in to the parking lot to find a Pontiac 6000LE... :-)

Certaindeaf
01-20-2015, 01:21 AM
I worked at the counter of a tire store a long time ago, guy comes in for tires, when I asked what car he had he says "ghoulie" I say what? He says "ghoulie" I walked out in to the parking lot to find a Pontiac 6000LE... :-)
Lol. His angle was more of a blob.

CGT80
01-20-2015, 04:05 AM
All of this talk about angles, but has anyone gotten to a point?

I found a calculator on google the other day so I could find the length of the legs of a 45 90 45 triangle based on the length of the hypotenuse. I guess, the point is, I could have done this by hand 15 years ago, but I forgot my geometry. IIRC, Pythagorean theorem should have worked for this........................yes, it would. I used it all of the time for framing walls. 3, 4, 5 gives you a 90 degree corner. Are you not supposed to drink blinker fluid? I have some unused lube grooves, too, if someone has an upgrade for my memory bank.

Smoke4320
01-20-2015, 08:40 AM
being an electrician I clearly would have no use for Angle's, but if you come across a bag of Ohm's I have an apprentice that is still looking for some.

OK since you are an electrican answer me this ...how long is a short circuit?
And remember to think angles here

castalott
01-20-2015, 08:41 AM
Do you guys remember a tv show called "Charlies Angles"? These 3 angles had great geometry...and perfectly formed masses of data points. I watched it for the intellectual benefits...

GoodOlBoy
01-20-2015, 08:45 AM
I had traded two quarts of vintage blinker fluid for a soup can of used 1/4 minute of angles. Then I tripped on deep pile carpet and can't find any of them....

GoodOlBoy

10x
01-20-2015, 09:33 AM
This thread is in desparate need of a new angle ....
As is your box of angles, possibly you should add some MiLs

dakotashooter2
01-20-2015, 10:20 AM
I'd be careful about buying from the OP. I think he is working some kind of angle....

Smoke4320
01-20-2015, 10:44 AM
This thread is in desparate need of a new angle ....
As is your box of angles, possibly you should add some MiLs
I tried selling grid squares but sells were all over the map !!

USAFrox
01-20-2015, 11:01 AM
Would you trade for some diesel engine spark plugs?

Bohica793
01-20-2015, 11:30 AM
If I buy an hour of angle, can I divide it into minutes myself or does that require a special tool?

aspangler
01-20-2015, 12:10 PM
I have a slide rule slide set up to figure cosines that I could trade for some angles. I need to get some angles and hippotomoose boots to catch some post holes for my fence repair.

Smoke4320
01-20-2015, 12:52 PM
Would you trade for some diesel engine spark plugs?

Only if they have glowing reviews

Certaindeaf
01-20-2015, 01:00 PM
Trounds never really caught on.. I'll stick with my boxes of rounds.. that aren't for sale.

montana_charlie
01-20-2015, 02:20 PM
how long is a short circuit
how long is a chinaman.

Blacksmith
01-20-2015, 09:34 PM
I have a tin can full of sight clicks in case someone needs some for adjusting sights.

flyingmonkey35
01-20-2015, 09:41 PM
I still have left over.

1 half bucket of muzzle blast.
4x kemlight battery.
1 left handed battery adjustment wrench.

And a stack of blank I-d 10 - T forms.

oldsagerat
01-21-2015, 12:37 AM
This one circle that has more than 360 degrees.

.45Cole
01-21-2015, 02:39 AM
AA good buy; I've been waiting for the right angle to come up. BBeings that I have my degrees I can finally obtain one without having anyone cosine the loan. = CCome to think of it I probably don't even need to sine a loan at all.

RED333
01-21-2015, 07:54 AM
If you divide by 3.14 and add one ohm and subtract the depressed moose it should come out about right- L .

O great, now I have to learn that new fangled math!

Certaindeaf
01-21-2015, 10:59 AM
Reminds me, my tackle box is a mess!

Shuz
01-21-2015, 11:25 AM
I'll trade you a SFRB of assorted rifling twists.

montana_charlie
01-21-2015, 01:28 PM
how long is a chinaman.
his sister, how tu, is also chinese.

Smoke4320
01-21-2015, 01:43 PM
and his brother Bing ding owl
The klutz of the family

Harter66
01-21-2015, 02:32 PM
I have a 73 Beetle radiator and some Beech vertazontal flaperones I trade for the flight line and a a pint of blinker fluid. I'll even throw in a bag of shutter bugs.

Col4570
01-21-2015, 05:00 PM
All things being equilateral I thought I might Try an angle.If I am not being too oblique it sounds like an acute investment.

Smoke4320
01-21-2015, 05:07 PM
All things being equilateral I thought I might Try an angle.If I am not being too oblique it sounds like an acute investment.

If I am not being too Perpendicular Your thoughts parallel mine, almost complementary

scarry scarney
01-21-2015, 05:13 PM
Anyone have any right handed nails with a two minute of angle strike head?

oldsagerat
01-22-2015, 07:10 PM
This is one circle with more than 360 degrees, never ending chords, and a lot of tangents.

Smoke4320
01-22-2015, 07:15 PM
Anyone have any right handed nails with a two minute of angle strike head?
I have a large box of left handed nails from a construction project ..

RED333
01-22-2015, 08:12 PM
I have a large box of left handed nails from a construction project ..

All Right, I have had it with lefthand jokes!
This offends me to no end, yall just have to stop.
For if yall do not stop I get the Revs on yall, Sharpy and Jess that is.
[smilie=1::violin::coffee:

doc1876
01-22-2015, 10:18 PM
I had pi for supper

Col4570
01-23-2015, 02:55 AM
I would trade a Corderoy Walking Stick with a Wheel on for some Angles.

fast ronnie
01-23-2015, 03:08 AM
I would trade a Corderoy Walking Stick with a Wheel on for some Angles.

How far does your walking stick travel in one hour? Is the wheel a companion or does it walk by itself? How often do the batteries need recharged?

Col4570
01-23-2015, 09:28 AM
How far does your walking stick travel in one hour? Is the wheel a companion or does it walk by itself? How often do the batteries need recharged?
The wheel is to stop the Stick wearing out at the bottom end.An old Bike wheel and a Stick is a good form of transport.We called them "A Bowl and Hoop".Mother would say "Hey son just nip down the Shops for my bottle of Whiskey and take your Bowl and Hoop it,l be quicker."[smilie=1:

Smoke4320
01-23-2015, 09:32 AM
I had pi for supper

The root of all evil

and Pi are round Bost bread are square :)

Dale in Louisiana
01-23-2015, 03:04 PM
How about a gallon of jet wash for a dozen muffler bearings?

Nope, But you can find them on the shelf next to wehre they hang the key to the hydrostatic lock.

dale in Louisiana

scarry scarney
01-23-2015, 05:35 PM
Dale

Do you know if the keys that I have for the pneumatic lock will work for the hydrostatic lock?

Smoke4320
01-26-2015, 12:00 PM
Dale

Do you know if the keys that I have for the pneumatic lock will work for the hydrostatic lock?

I can't answer that but I can tell you they will not work on my thermal shocks

oldred
01-26-2015, 12:43 PM
I clicked on this thread because I thought he was talking about a box of angles???? :groner:



http://www.judgetool.com/images/products/detail/Angle%20blk%20set.jpg

Blacksmith
01-26-2015, 09:25 PM
It's a sine of the times.

CastingFool
01-26-2015, 11:32 PM
128638

Smoke4320
01-30-2015, 10:18 PM
128638
Looks like #8's angles run all the way to her cosine