.32 Lee mold reccomendations?

[tomf52]

Anybody have any experience with the .32 H&R Mag in a Marlin 1894 Cowboy and Lee molds? Would like to get one (a mold) and not sure which would be a good choice. Looking at the 93 grain only because it is available in the six hole version and the others are not. Haven't slugged the barrel yet so not sure if this .311 dia would work or I should go to the tumble lube semi wadcuter which is advertised at .314 dia. Thanks for any help with this.

[9.3X62AL]

No work with the 32 Mag in a rifle, but my current Marlin 94CCL and a previous Marlin 94CL in 32-20 both need/needed .313" boolits. The Lee 100 grain RN barely makes .311"--same story for the Lee Soup Can (113 grain flatnose/gascheck).

In handguns--without doubt--the best cast boolit for the 32 Magnum has been the RCBS 98 SWC. It drops at a fat .314", and the 314" sizer just brushes the drive bands.

[Adam10mm]

Good to know because my SP101 .327 has .314 throats.