NOE Mold for 8x57

[TreeKiller]

I have spent a week looked through the Military rifle, CB loads for Military Rifles and the Cast Boolits thread and cannot find the NOE 8mm that is recommended.
Since NOE is having a sale I thought that I would see if he has one in stock for the 8x57
Thank You
Dan

[JeffG]

You mean the 326471?

[Blammer]

I would use this one. :)

http://noebulletmolds.com/NV/product_info.php?cPath=32&products_id=809

[Deep Six]

I designed the 32-175B at Accurate. While I'm no expert at cast boolit deign, I can't recommend this design enough! I've been shooting it for about a year now and it just works. I load it over 18 gr of 2400 powder and lubed with Ben's Red. My Yugo 24/47 will easily hold an inch at 50 yards. I was shooting clay pigeons at 50 yards yesterday and couldn't miss. It's also showing great promise as a heavier load using about 30 gr IMR 4198 with dacron filler, but I have some more load development to do yet. Sized at .325, it hasn't left a trace of lead in the bore after a couple hundred rounds. The only negative is that it doesn't feed very well from the left side of the magazine (rounds 2 and 4) due to the short flat nose. I figure it doesn't really matter since I'm not taking it to war.

[TreeKiller]

Thanks All;
i got the 326-407

[Char-Gar]

Thanks All;
i got the 326-407

I think you will like it. It is a scaled up version of 311407 which has proven to be an excellent design. Let us know how it works for you.

[leftiye]

Flat nosed Loverin it looks like.

[Blammer]

I'd start with 30gr of IMR 3031 and see how that works for you. :)