View Full Version : Wave washers an the RCBS pro melt
Ever use wave washers under the Allen head bolt or jam nut shown in the pic.
Having a hard time keeping things snug and where they belong. I might give it a try.
120748
VHoward
10-31-2014, 11:25 PM
I have a hard time loosening it when I need to change the setting.
cheese1566
11-01-2014, 10:51 AM
I like to keep mine loose so I can adjust it as the pot empties. I used to snug it with a wrench but found it a hassle. I snug the nut with my gloved hand if needed.
I did ever so lightly bugger the threads on the screw so it would be tight in the arm.
dikman
11-01-2014, 07:55 PM
I put a stiffish coil spring between the head of the bolt and the nut. Applies constant pressure so reduces the chance that it will "re-adjust" itself, but still allows me to tweak the adjustment with my (gloved) fingers.
seagiant
11-02-2014, 12:43 AM
Hi,
Like cheese, I run it loose!
engineer401
11-02-2014, 11:18 AM
I like to keep mine loose so I can adjust it as the pot empties. I used to snug it with a wrench but found it a hassle. I snug the nut with my gloved hand if needed.
I did ever so lightly bugger the threads on the screw so it would be tight in the arm.
Same here.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.