October 2014 Photo Submission Topic: Molds and/or Your Pouring Setup

[JonB_in_Glencoe]

October 2014 Photo topic: Molds and/or Your Pouring Setup

Rick, (cbrick) is the winner.

http://i640.photobucket.com/albums/uu127/JonB_in_Glencoe/Castboolits%20Castpic%20of%20the%20month/October2014Moldsandcastingsetup_zps9b30449e.jpg (http://s640.photobucket.com/user/JonB_in_Glencoe/media/Castboolits%20Castpic%20of%20the%20month/October2014Moldsandcastingsetup_zps9b30449e.jpg.ht ml)

For sure, I want your mold in the photo, if you chose to photograph your setup, I want a Mold in there somewhere.

[SteveM]

It probably won't be the winning pic, but I used this set up for over 15 years and cast thousands and thousands of bullets. The hotplate finally gave out about a year ago, and I replaced it with a Lee 4-20. Pictured is an LBT .512 525 grain GC mold for a 500 Linebaugh Maximum.
http://i692.photobucket.com/albums/vv282/stevemikel/100_1683_zps2e6a1bae.jpg

[MOA]

My best boolit for Fat hogs.

http://i857.photobucket.com/albums/ab136/nitroexpress450400/Mobile%20Uploads/20140705_104809_zpsa0c3d64e.jpg (http://s857.photobucket.com/user/nitroexpress450400/media/Mobile%20Uploads/20140705_104809_zpsa0c3d64e.jpg.html)

[skeettx]

For fun, H&G Moulds

http://www.hunt101.com/data/500/medium/MVC-027S19.JPG

[cbrick]

118870

Two RCBS molds, both 300 gr GCFP. One mold modified to cast one cavity the standard 300 gr FPGC, the other cavity to cast FPPB. The second mold modified to cast one cavity GCHP and one cavity PBHP. Two molds, four cavities and four different hunting bullets.

EDIT to add: The work on the molds was done by Erik Ohlen of Hollow Point Mold. This is the picture on the cover of Glen Fryxell's book: From Ingot to Target.

[bdicki]

http://i160.photobucket.com/albums/t182/bdicki/IMG_0575_zps3cb9fd96.jpg

[Bullwolf]

Picnic table casting in the evening, with the hand held Hot-Pot. (electric ladle)

http://castboolits.gunloads.com/attachment.php?attachmentid=114930&d=1409365478


- Bullwolf

[WouterNL]

A chaotic scene in the hobby-shed of a newbie in casting, photo is taken a few seconds before the very first casting with a brand-new mould :
http://pic100.picturetrail.com/VOL1132/4473910/24533022/410198378.jpg

[RED333]

MP mold collection, 30 cal to 45 cal
http://i896.photobucket.com/albums/ac165/redintn/MP%20molds/DSCF1260_zps88bcf47c.jpg (http://s896.photobucket.com/user/redintn/media/MP%20molds/DSCF1260_zps88bcf47c.jpg.html)

[Col4570]

http://i1052.photobucket.com/albums/s452/livebattery/sidepourmouldforlargewhitworthRifle001.jpg (http://s1052.photobucket.com/user/livebattery/media/sidepourmouldforlargewhitworthRifle001.jpg.html)
Modified Lyman Mould for casting Hollow base hollow wood filled nose bullet for .568 Whitworth match Rifle.620grains.

[Col4570]

http://i1052.photobucket.com/albums/s452/livebattery/sidepourmouldforlargewhitworthRifle002.jpg (http://s1052.photobucket.com/user/livebattery/media/sidepourmouldforlargewhitworthRifle002.jpg.html)
Another View.

[cdngunner]

119616

[hcvrr]

Been a member for a little while, but first post. Here's my setup.120157

[Pinsnscrews]

http://i27.photobucket.com/albums/c167/wyckedflesh/Mobile%20Uploads/A41816C1-BD71-49EF-B8D3-BEDFB466DF4E_zpscris5iif.jpg

Waiting for the ladle to heat up before adding the flux...first pot of lead melted and cast.