JSH
10-05-2014, 05:57 PM
Need some help please. Pot started dripping so I pulled the stem out. Cleaned it and the hole. I did not run a drill bit into the spout. I know this has caused folks issues in the past.
Does the pin on the end of the stem go all the way into the spout? Or, does the tapered larger part do the sealing? Or both?
Got it cleaned up and it runs all the time now. Not just drip.
Had a bunch of **** in it from some dead soft lead.
Thanks
jeff
Does the pin on the end of the stem go all the way into the spout? Or, does the tapered larger part do the sealing? Or both?
Got it cleaned up and it runs all the time now. Not just drip.
Had a bunch of **** in it from some dead soft lead.
Thanks
jeff