9mm in 16" carbine 130-150gn mould?

[minmax]

I have a Kel-Tec Sub 2000 and a Marlin Camp Carbine. I don't have a chrono yet what type of velocity can I get?
I'm thinking about the Lyman 147gn or if someone can suggest a custom mould.

[MGnoob]

I just tried my 16 ar 9mm conversion. using my 130 grain plated projectiles.
they crony at i believe 1050-1100fps out of my sig p226 handgun.
The functioned good in semi, but had trouble with full auto... i have the drop in magwell conversion block that has the feed ramp attached to it, and movement of the magwell adapter effects the feedramp location causing jams.

I didn't take a moment to chrono it but i would assume it's only a couple hundred fps fast out of the rifle.good luck

[MGnoob]

my lyman 147grain mold drops them at 157. take this into acount if it is somthing your going to try.....i'll even sell you mine i don't like it.

[petroid]

my lyman 147 drops at 155 with 50/50 pb/coww

[MGnoob]

my lyman 147 drops at 155 with 50/50 pb/coww

I should have mentioned mine are cast out of 90-95% COWW with some stick wheel weights that get past what little sorting i do.