PDA

View Full Version : M&P 9mm, load results



Harpman
02-02-2008, 12:14 PM
I got the Lee mold 358-150-1R, using roughly 20-1 mix, they cast at 358, using 3.4 grains of N340, bullet seated deep, just touching the powder but not compressing, group is bullets touching at 40 feet....I had some cast bullets got on trade that were very similar but weighed 127 grains and size at 356, I could not get those to shoot good at all and had leading.

oso
02-03-2008, 03:23 PM
I've wondered about the Lee 358-150-1R in 9mm. Good info. Keep us posted on your results.