Dedicated 30/30 Mold

[frnkeore]

Check this mold out. It's designed JUST for the SAAMI 30/30 chamber and COAL.

http://noebulletmolds.com/smf/index.php/topic,306.0.html

There are already 4 buyers and we need 6 more to run it.

I know of no other mold that is made in this way to fit the 30/30 chamber.

Frank

[Yodogsandman]

Is there a technical drawing available to see? I don't have the dimensions of something like the 311241. What are the improvements over the 311291 or 311041?

[frnkeore]

If you click on the link, you can read the details and then click on the drawings, you should see both a drawing of a GC and a PB version. The bullet isn't really like any of the three bullets that you list but, the 311041 would be the closest.

Frank

[Yodogsandman]

My view doesn't have any drawings to click on.

[dromia]

Link works fine for me.

Drawings are at the bottom of the first post.

I have to say I'm tempted with it.

[WILCO]

My view doesn't have any drawings to click on.

Same here.

[WILCO]

I have to say I'm tempted with it.

You'll feel better as soon as you open your wallet! :mrgreen:

[dromia]

Not sure if this is the reason but perhaps you need to be logged onto the NOE forum to see the images.

[Hardcast416taylor]

I had to go to their website to see the diagram of each style. I made up my feeble mind and committed to an order.Robert

[frnkeore]

For those that can't view the drawings.

114954114956

[Doc Highwall]

I like the Ranch Dog version that NOE made for a 30-30 bullet with a large flat nose for killing power.

[frnkeore]

This mold is now a reality. You can sign up for it on the "Active Group buy" thread now.

http://noebulletmolds.com/smf/index.php/topic,314.0.html

Frank

[44man]

Made my own mold, .301" ogive and .311" drive. Shoots under 1" at 100 and has done 5/16". I would give NOE some boolits to copy. That boolit looks close but I have a larger meplat. It is 187 gr.115322

[44man]

Close up of my boolit.115323

[44man]

Free to all. No drawings, need a boolit to copy. The can shown has 3 shots in the hole, no other boolit I have can do that. Has anyone shot cast like that from a Marlin at 100 yards? Some consider me a crazy old coot but nobody makes a revolver shoot like I do either.
I make a cherry by eyeball and cut a mold to get crazy small groups. My .44, 45-70, .475 and .500 JRH boolits have never been equaled. and now the 30-30.
Some of my boolits might become a reality from a mold maker. Maybe not here
I will give them to copy but don't think you know better and change them.

[reloader28]

This NOE boolit looks alot like the RCBS SP 150 that I have.
I crimp in the top lube groove and shoots great in both my 30-30's.
Drops at 160gr.