sizi g question from a true noob.

[allen16323]

I am going to powder coat so I don't need to lube the boolits I am making. The question is can I size on an rcbs rock chucker, will sizer dies and pun he's fit a regular press?

[JonB_in_Glencoe]

Yes.

http://leeprecision.com/bullet-casting/lube-and-sizing-kit/

[el34]

The link above shows all the choices of sizing dies. The little Lee press just represents a press being used with the dies. All brands of presses have the same standardized threaded hole for dies but a progressive press might not work out very well for sizing.