johnnyastro22
07-06-2014, 09:41 PM
As the title says, this is my Marlin 336 30/30 with Winchester 748 load data, use at your own discretion.
As a new a caster I've taken all kinds of good stuff from this forum and I now have a pet load worth sharing.
I melted various wheel weights, skimmed the junk off the top and poured a Lee ingot mold. No specifics for lead...
Cast with a LEE 2-Cavity Mold C309-160-R #90367 dropping an actual cast boolit at 163 GR.
Load data is as follows:
163 GR RNCWW with Hornady gas check
Brass is once fired WIN FC 30/30
23 GR Winchester 748
COL @ 2.4945
Marlin 336 with Micro Groove Barrel Tru Glo Green & Red "iron" sights
Very accurate zeroed at 100 yards.
Learning to do this has been outstanding, maybe this will help another guy.
As a new a caster I've taken all kinds of good stuff from this forum and I now have a pet load worth sharing.
I melted various wheel weights, skimmed the junk off the top and poured a Lee ingot mold. No specifics for lead...
Cast with a LEE 2-Cavity Mold C309-160-R #90367 dropping an actual cast boolit at 163 GR.
Load data is as follows:
163 GR RNCWW with Hornady gas check
Brass is once fired WIN FC 30/30
23 GR Winchester 748
COL @ 2.4945
Marlin 336 with Micro Groove Barrel Tru Glo Green & Red "iron" sights
Very accurate zeroed at 100 yards.
Learning to do this has been outstanding, maybe this will help another guy.