PDA

View Full Version : Can anyone identify this for me?


500MAG
07-05-2014, 07:58 AM
Found this in the bottom of an old box and have no idea what it went to.
gmsharps
07-05-2014, 08:29 AM
Looks like a tool for the M14. The little rod the swings out from the middle screws onto the cleaning rod section. There should a multi sided hole on one end to remove the gas plug.

gmsharps
Bad Water Bill
07-05-2014, 08:34 AM
WOW that is the thigamabob that fits on the whatchamAGIGGER of the one and only Asperlyaimless that Bullshop lost in the bush of wilderness Alaska.

Nope have not a clue
HollandNut
07-05-2014, 08:42 AM
yep gmsharps is correct a mundo
500MAG
07-05-2014, 09:10 AM
Looks like a tool for the M14. The little rod the swings out from the middle screws onto the cleaning rod section. There should a multi sided hole on one end to remove the gas plug.

gmsharps
Thanks for the help.
Petrol & Powder
07-05-2014, 10:03 AM
gmsharps is correct. It should be accompanied by a small OD green cloth bag with about 4-5 cleaning rod sections and a slotted tip. The end of the tool with the little blade is used to remove the extractor of an M-14 bolt, therefore allowing the bolt to be completely disassembled. If you use that function be careful to retain the spring and other parts. Not something I'd recommend doing in the field!