Firing Pin Replacement for early Interarms Rossi 92

[FISH4BUGS]

I have a very nice early Interarms Rossi 92 SRC in 38/357. I broke the firing pin and have a replacement in hand.
Are there any videos/instructions, etc. anywhere that will tell me how to replace the firing pin?
Many thanks.

[starnbar]

Fish you have to pull the bolt out and you may have to fit the firing pin by grinding or machining the firing pin itself I had to fit mine it wasn't hard if you have the right tools and know how to do it.

[mran1126]

Should be able to find a video on You Tube. But if you can take the bolt out. Just a pin holds the firing pin assembly in.

[knifemaker]

Not 100% sure, but I recall someone mentioning that there was a how to video at Youtube that showed how to replace the firing pin in a Rossi 92. I do know there is videos on youtube for disassembly of the Rossi 92.

[searcher4851]

I'm curious to know where you came up with a new firing pin. Parts for these things are difficult to come by.

I know there are youtube videos for teardown, but don't recall one specifically showing firing pin replacement. The basic teardown videos should get you close enough, and you can figure out the firing pin from there. starnbar is correct that it may require some minor fitting.

[pirkfan]

Steve's Gunz carries firing pins for the 92, they are pre-safety models, but you can alter them to fit the post safety 92's

[saguaro]

Check this link. He has very good directions on assembly and disassembly of the Rossi 92. There's a nice trick for getting the bolt back in.
http://marauder.homestead.com/irons.html