38/357 mold

[whelen fan]

I recently asked some questions about ideal molds I received and while I do have a 4pm banger 35863 it being a DEWC is no good for my rubber bullet trap as it would chew up my rubber lid pretty quick. Can someone recommend a mold that won't chew up my rubber lid? I use the 120tc from lee in my 9mm and that makes tiny holes.

[dubber123]

In a Lyman, the 358311 is VERY accurate for me at 50 yds. and is quite pointy. I would expect minimal damage from it.

[whelen fan]

Doesn't have to be Lyman. Will check that out though.

[tazman]

In a Lyman, the 358311 is VERY accurate for me at 50 yds. and is quite pointy. I would expect minimal damage from it.
I agree with this recommendation.
Check to see how large the diameter is on your Lee 120tc. If it is large enough for your 38 you can use it for practice at least. Mine drops at .358 and I can shoot it in my 38/357 unsized. Since I tumble lube, I can use the lube groove to crimp the boolit in my 38 cases. Shoots great that way.

[whelen fan]

Does NOE or someone make the 358311 mold?

[MtGun44]

Use the Lee 120 TC.

Bill