Top punch for Lee 309C-170F?

[LivewireBlanco]

I've consulted the almighty Lee to Lyman chart and there is nothing for this bullet mold. Am I stuck with making my own work or is there one that is "close enough"?

[Ed_Shot]

Use Lyman top punch #291 for 309C-170F. Lyman #8 will mark the top of that boolit. Lyman #311 (even though it's for 35 cal.) will work well also....no need to have the top punch touch the sizing die with this boolit.

[JonB_in_Glencoe]

I use a Lyman 467 top punch that's been 'tweeked' to fit all the Lee round 30 cal molds as well as the 170gr flat nose you are asking about.

[Ed_Shot]

JonB made me think. Lyman top punch #291 for their 311291 has been redesignated #465.

[ShooterAZ]

I use the Lyman #8, and used a dab of 5 minute epoxy to match the profile of the boolit. No marks, works perfectly.

[LivewireBlanco]

Thanks guys!