PDA

View Full Version : if you only had one 8 mm boolit mold what would it be ? looking for a good one



badbob454
04-29-2014, 01:02 AM
i have a 8mm yugo m24/47 mauser looking for a boolit on the heavier side 180 or more to use as my only everyday allpurpose accurate boolit what works well for you , i have too many different caliber rifles to buy more than 1 for this shooter .... please help

Moonie
04-29-2014, 08:04 AM
I only have 1 8mm mold for my old mauser. It is the Lee Karibiner from midsouth.

pworley1
04-29-2014, 08:15 AM
+1 on the Lee Karibiner.

cainttype
04-29-2014, 08:34 AM
NOE has an 180gr 8MM that should be great, the 325-180 FN.
I just received mine but haven't had the chance to use it. I really like the design and expect it to perform great as my all-around 8MM.
Like all of Al's moulds, she's very nicely done. If it performs as well as the other NOEs here, it'll be a joy to use both casting and shooting.

badbob454
04-29-2014, 05:43 PM
any other suggestions , thanks for all i never loaded for the 8mm .....had 9,000 rounds of turkish and im just about out ...

gpb
04-29-2014, 07:29 PM
Take a look at the Saeco #081. I use that in my Yugo M48. Easy to cast bullet, feeds well and shoots well for me.

Looks like this:

http://www.midwayusa.com/product/162777/saeco-2-cavity-bullet-mold-081-323-caliber-8mm-323-324-diameter-190-grain-round-nose-gas-check?cm_vc=ProductFinding

Wally
04-29-2014, 07:36 PM
I have the Saeco 081 that I shoot in a 8mm Rem Mag...very accurate....

JeffG
04-29-2014, 11:34 PM
I'm using NOE's 326471, 215 gr GC and really like it. I'm still playing with the load but have zero complaints so far. This is supposed to be a copy of the old Lyman 323471.

http://noebulletmolds.com/NV/product_info.php?cPath=32&products_id=653

Blammer
04-29-2014, 11:49 PM
NOE 325365 with a HP option or a 325407. :)

ok I can't pick one...

badbob454
05-01-2014, 03:06 AM
i went with the lee 175 grainer... $ is short , the noe will be next on my list ... when cash cow visits . if the lee dont shoot so good .... i have read good stuff on this boolit supposed to feed and be accurate ... really a lee... , i may leement it to fit my bore