Load recomended for .380

[stubert]

I'm shooting the Lee 100 gr. rn in a Walther PPK/s .380. I have w-231, bullseye, and unique. I am looking for a plinking load that will cycle reliably. Hopefully with w-231, ( that what I have the most of) any recomendations would be appreciated. Thanks folks, Stubert

[Marcduper]

Hey,
I have been running 3.0gr of 231 with 95gr lead rn in my P232. Very accurate and works the gun well.
Marc

[Ed_Shot]

I've had good luck with the Lee 356-102-1R over Unique 3.0 gr. in a PPK, Bersa, LCP and Colt Mustang. Accurate and reliable in all. Mine weigh 103 gr. and I size to .358 with White Label 2500+ lube.

[reloader28]

3gr must be it.
I use 3gr Bullseye. Works great in 8 different 380's here with 103gr RF sized 358.

[rintinglen]

Hey,
I have been running 3.0gr of 231 with 95gr lead rn in my P232. Very accurate and works the gun well.
Marc
+1
I use this exact load with my 356-100 TC RD boolits. Works in 4 of my 5 380's--haven't had a chance to try the 5th one out yet, sigh. So many guns, so little time.

[sandman228]

ive been using the lee .356 102 with 3.2 gr hp38 out of my lcp for plinkers .I don't often shoot that gun though unless I have a spotter with me to pick up brass as I shoot . if not im lucky to find half of it .

[stubert]

Thanks for the replys, looks like 3.0 gr. 231 to start,

[DaveSpud]

OTOH, I use 4.0 gr. Unique under Berrys 100gr. plated. Should work equally well for your 100gr. LRN.