357 Max brass available soon

[wlc]

Didn't know where exactly to put this but felt it would get more views here. I know there are several here on castboolits that shoot the Max. I was over on Mike Bellm's site a few minutes ago reading his section on the 357Max. He stated on there that Remington was doing a run in May of this year. I figure he would know as the Max is one of his personal "crusades".

Might be in your interest to go to Midway and get on the notify me for availability on Max brass. When it becomes available you better jump on it. As far as I can tell Remington only does a run of this about once every year or two. Hope this helps some of our Max shooters out or helps someone on the fence about the Max "jump in".

[Charley]

Good to hear. Can always use more to convert to .351 WSL.

[pme166]

As a Max shooter, I can comment that last time it came up on Midway it lasted about 1 day. I know I bought 2000 pieces and was going to get 2000 more and it was gone by the time I decided to buy it. Act accordingly.

[NSB]

As a Max shooter, I can comment that last time it came up on Midway it lasted about 1 day. I know I bought 2000 pieces and was going to get 2000 more and it was gone by the time I decided to buy it. Act accordingly.

2,000.....You know you can load them more than once don't you:D

[runfiverun]

I just picked up some pre-made 351 brass at graph and sons.
it is cheaper than the max brass, which would get shot through the revolver anyway.

[pme166]

I understand it is reloadable, but at full power loads, it does not last long. With 3 Maxes to keep fed, I wanted a good supply of brass available.