PDA

View Full Version : Looking for loads for a 45/70



S.B.
03-10-2014, 07:28 PM
Using LBT 450 gr. bullets. What powder and how much(range low to high)?
TIA, Steve

warboar_21
03-10-2014, 07:38 PM
search function would be highly suggested. Unique is what I use for low end loads and RE-7 is what I use for all upper end loads.

hickfu
03-11-2014, 12:27 AM
I dont use a 450gr but my 430gr's I use H322 IMR-3031, 2400

Starline brass / Winchester LRP / 42gr - 47gr H322 powder / 430gr Tombstone GC boolit (47gr is 1663fps )
Starline brass / Winchester LRP / 42gr - 45gr IMR-3031 powder / 430gr Tombstone GC boolit (45gr is around 1600fps)
Starline brass / Winchester LRP / 24gr of 2400 / 430gr Tombstone GC boolit (Never chrony'd but guessing 1200 to 1300 fps

All 3 powders are very accurate with just a little nod towards the IMR-3031.... ragged hole at 50 yards 15 shots and I was really only checking velocity of the 45gr load


Doc

MtGun44
03-11-2014, 12:01 PM
For plinking and just fun target shooting - 10-14 gr of Unique.

For hunting, I use 57.0 W748 under either RCBS 405 GC boolit or Rem 405 Jbullet. Gives about
1750 and very effective on game.

http://castboolits.gunloads.com/attachment.php?attachmentid=99217&d=1394553968

Bill

S.B.
03-12-2014, 12:35 AM
Thanx Doc, someone finally hit on a powder I just happen to have a good supply of, IMR 3031