PDA

View Full Version : MIHA 135gn RNFP 9mm load data


sig2009
02-24-2014, 12:09 PM
I've been playing around with the MIHA 135gn RNFP SOLID 359-135 9mm mould trying to come up with a decent accurate load. Using 3.5gn Bullseye but I am not happy with the accuracy.

Any suggestions for reloads from anyone using this mould?
dragon813gt
02-24-2014, 12:15 PM
To avoid the confusion that I know is coming. This the 359-125 hollowpoint in solid form. I can't help w/ 9mm loads because I've only been using it in my 357s.
sig2009
02-24-2014, 12:18 PM
To avoid the confusion that I know is coming. This the 359-125 hollowpoint in solid form. I can't help w/ 9mm loads because I've only been using it in my 357s.

No this is the SOLID 359-135 9mm RNFP.
dragon813gt
02-24-2014, 02:00 PM
No this is the SOLID 359-135 9mm RNFP.

It is the same mold. I have both of them. More people have the 359-125 so you will get more info from them. The 359-125 throws a 135 grain solid w/ the plug pins installed.
btreanor
02-24-2014, 04:53 PM
I had good luck with 5.6 grains of HS-6 with this boolit. I sized it to .358 for my euro 9mm's.
sig2009
03-05-2014, 01:34 PM
So out of all the casters that bought in on the group buy for this mold no one has any suggestions?
dragon813gt
03-05-2014, 02:04 PM
You should be able to use any of the data in the manuals. I believe Lee has some listed for this weight. I'be had great success w/ W231/HP-38 in 357. Pick one of the powders you have on hand and load some up. I also think that most people cast hollowpoints. That's one of the attractions of his molds.