LEE pot question

[kooz]

I will be buying my first melting pot soon and after looking at them today at Sportsmans, I am thinking about buying the LEE 20# bottom pour model, looks like I could use this model for ladel casting as well ?

[jawjaboy]

Yessir, sure can kooz!

[kooz]

Thanks, looks like the LEE is a very good deal. They didn't have a 20# model, only 10's and it looked like it would be way to confined to ladel from the 10.

[Ricochet]

For bottom pouring, the 4" high models are easier to maneuver moulds under than the 2" high ones.

[freedom475]

I have a lee 10lb'er and ladle poring is not really feezable unless you fill the ladle through the bottom pore spout. Or plug the hole and remove the "rod".

[kooz]

How do you plug the hole so that it is not permanent and the rod can be replaced when needed for bottom use ?

[TAWILDCATT]

check midsouthshooters.com.the sportsman guide I know is mailord so I dont know their prices.lee 20 lb pot is $61.22 or lee magnum melter is 20 lb dipper at $47.61
cant convert and then reverse.
:Fire::coffee: