180 GR Load Data for 35 Remington

[bigtee]

Just ordered a NOE 360 180GR WFN mold for my 35 Remington and I'm not finding much load data. I have manuals from Hornady, Sierra, Barnes, Nosler and the Hodgdon. Only Hodgdon gives data for the 180 GR and it's only a couple of powders. I'm looking for loads for IMR 3031 and 4198. I have heard that the Speer manual has loads for the 180 GR in some older manuals. I would get the new Speer manual if it has load data for the 180.(Good reason to get another manual)My Lyman cast manual has loads for a 195 GR boolit, guess I could start from there.

Does anyone have a Speer manual? If so, could you look and see if it has 180 GR data for IMR 3031 and 4198?

[whisler]

Speer no. 10 does not list either of those powders for 180 gr. It lists H414, H335, H380,748, SR4759 (reduced load), RE7, BLC2, IMR4320, & IMR4895

[ButterNutZ]

This is off the Hodgdon webpage.
180 GR. H4198 COAL2.470" start 28.0gr Vel 1971 Max load 32.0gr 2172 33,000 CUP
No data for 3031.

[runfiverun]

just use the data for the rcbs 200 mold.