Newbie info

[wild bill wildbill59]

I have cast .321 rcbs fngc in 170 gr and would like to use 19 GRS of alliant 2400 . the bullets are lino will this load work?

[MtGun44]

It would help a LOT to know what cartridge and gun we are talking about.

Pretty sure a .32 S&W wouldn't like that load, but an 8x57 Mauser might.

Bill

[fcvan]

I curious, what does the book say for your particular caliber. Since you did not identify the cartridge, the type of weapon, or any other relevant information, it would be hard to say. What did your bore slug measure? What did you size your boolit to? What type of lube are you using?

A good reloading manual is a great benefit. Looking up load data online from the powder manufacturer would also be a good start. There is a wealth of information, and a lot of helpful folks here. It's hard to help you if you don't provide enough information to go by.

[wild bill wildbill59]

I am shooting 32 win special out of model 94 winchester

[wild bill wildbill59]

I am learning all the info necessary to develope cast loads through your expertise. Thank you
I now know I have to slug my bore ! Never done that before.