is this mold to big?

[oldfart]

I have a 45-325 fn
can it be sized and used in a 45 win mag t/c barrel?

[45nut]

if its not a rifle ..as in .458 mold,, sure you bet
nice bbl,, nice caliber. :p

[oldfart]

it is rcbs 45-325 fn mold
I want to use it in my 45 win tc barrel 14"

I think it drops a 458, just my luck

[JSH]

If it would chamber, your case may have an hour glass or funnel look? TC is always very generous on throats, so you may make it work. I advise you to use caution with this combo either way.
Jeff

[oldfart]

yeah was considering sizing it down, but may not have any lube rings left

[scb]

I've got the same mould and size it to .452 in a Lee sizer to use in my 45 Colt Contender bbl. I size/lube and seat gc in 458 star sizer first. works good.

[oldfart]

problem solved, I swapped with scrounger