sundog
11-21-2007, 01:26 AM
I was cleaning some moulds this evening that accumulated a few spot of 'red dust' over the rather damp summer we had, and decided that since I had some decent tape to clean and beagle the 311284. Several 30 bores around here don't like the smaller .299 nose on the mould I have, soooo.
Boolits came out at 217ist grains, .301x.303 on the nose, and .310x.314 on the bands. Ran some thru a .311 die and they look really good. Nose is now large enough to NOT enter muzzle on two rifles I wanted to try it in. Maybe this weekend a few testers....
About the tape, in case y'all didn't see my comment in the .303 thread, I got some Ace Flue Tape. 600dF. Good stuff. No runny glue, curly edges, etc. Stays in place.
Boolits came out at 217ist grains, .301x.303 on the nose, and .310x.314 on the bands. Ran some thru a .311 die and they look really good. Nose is now large enough to NOT enter muzzle on two rifles I wanted to try it in. Maybe this weekend a few testers....
About the tape, in case y'all didn't see my comment in the .303 thread, I got some Ace Flue Tape. 600dF. Good stuff. No runny glue, curly edges, etc. Stays in place.