Here's Miha 477-640GC

[birddog]

It is the large HP weighing in at 380grs. lubed w/ck. I was shooting off a rest at 25yds and not sure if the flyer was pulled or if the cluster was pulled!! HAHA:) Anyway the load is 20grs of WW680 from my 9.5" bbl 480 SRH. I was happy considering my eyes just aren't as good as they once were.
Charlie
88618

[white eagle]

excellent I love the 480 rug I have one as well
pulled or not still great shootin
what do you think of Miha's boolit? I have the design in many cals it a goodn

[paul h]

Nice! The 480 SRH has always amazed me with how accurate it is.

Have you had any issues getting good bullets out of the mold? Mine seems to give me grief, either it's too cold and the bullets are wrinkly, or if I get it nice and hot and a good tempo the bullets crumble as they drop from the mold and leave part of the bullet in the mold. It might force me to go to a PID. I've cast straight ww's, ww/range scrap 50/50 and have added 2% tin to ww's and 2% tin to the 50/50 mix.

The mold is a work of art

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/11225_10200484614779119_43068111_n.jpg

[birddog]

I really like the mold and I too went through some growing pains with my mold. But with some good breakin practice it is dropping real nice bullets. Getting the mold too temp and then pouring lead at about 700 degrees has worked very well.
Charlie

[paul h]

I figure I just need to spend the time learning what the mold likes. My 360640 casts so nicely I was a bit shocked with the 477640.

It was pretty impressive shooting some of the big hp's into glacial silt as it produced a nice large cavity and fairly deep penetration and I still had a ~275 gr wadcutter after the nose blew off.

https://scontent-a.xx.fbcdn.net/hphotos-ash3/1380565_10202125909690466_625288731_n.jpg

[Lefty SRH]

Thats nothing to laugh at, nice group! I enjoy my SRH in .480R but i only 1 mold for it at the moment.