looking for some lyman 287641s

[jballs918]

hey guys im trying to get my 7mm mag up to speed but i don't know what mold to use yet. i have looked at alot of molds and this one looks like it might work. i'm looking for 25 or so just so that i can have a good amount to test with. i would also need j/cs if anyone can spare them with the boolits. so if anyone out there in tv land has a few that they can spare that would be great and also if anyone has anyone others in the 7mm type that would be great. thanks again guys.

[Calamity Jake]

Don't have the lyman, how about some RCBS 7MM-168's?

[sundog]

If Jake can't help you, maybe I can. I'll second his suggestion of the RCBS 168 for the 7 mag. That was a tough one for me to get shooting. I finally settled on [IIRC] the RCBS boolit, 30.0/3031 and a dacron wad. That's a big ole case a a very short neck.

I'm pretty sure I have the Ly mould, so if you just have to have some, PM me.

[mooman76]

7mm 0.287 Semi-spitzer 135? Ly287346
7mm 0.285 Semi-spitzer 145 RCBS 689538
7mm 0.286 FN 131 Lee Custom

Don't know what you need but this is what I have. May be a little light for what you want, I don't know! Let me know if you what to give them a try!

[7s&8s]

Could help with some:

lyman 287641,
lyman 287308 (162),
saeco 071 (160 gr)

Send a pm if you'd like to pursue.
Best Regards,
Tom