PDA

View Full Version : Mold dimensions, weights needed



joeb33050
11-02-2007, 09:36 AM
The RCBS story is under control. I need dimensions on SAECO molds, length, width and height, not counting the sprue plate. Then the area of the sprue plate part that overhangs the mold-I trace this on graph paper, count the squares, and do the arithmetic. Also need the weight in ounces and tenths.

For Lyman molds, newer ones, they seem to be 1.24" X 1.38" X 1.48", and the sprue plate overhang is .57 square inches. Weight in DC 314299 is 11.1 ounces. It would be great to have some verification of the Lyman dimensions, and some weights-particularly for the big 45 caliber molds.

Thanks;

joe b.