Saeco #351 in 35 rem. ?

[RU shooter]

Anyone have any good thoughts about this combo? Since its the only FB 35 cal boolit mold I could find in my midway cat. that was 200 gr. I would be shooting it in a rem. 600 . I thought about trying a lighter pistol boolit but I dont think they would feed from the magazine well with a short OAL Is there any other FB 35 molds 200 grs or heavier ?

[garandsrus]

RU,

I use the RCBS 35-200-FP which seems to be the most popular boolit for the .35 Rem. I have had good success with it. I also have the Lyman 358315 (RN) but I haven't shot any of them yet.

John

[onceabull]

NEI is still showing a 190gr and a 210 gr PB boolit mould on their website.And they advertise that any GC mould they list can be produced in PB ,No added charge. Their 358-220GC or 358-232GC made as PB might be what you seek. No flies on the Saeco #351,though...enjoy,Onceabull

[shooter93]

I can send you some 200 gr. from a Saeco 356 if you want to try them. They are 1/16 gas checked sized 358 with alox lube.

[shooter93]

I also have a few from a 352 which is 250 grain gas check from saeco.

[Lloyd Smale]

my two favorite 35 rifle bulets are the rcbs 200 and the seaco 250.

[Glen]

Yeah, what Lloyd said....