AR Platform 7.62x39 cast

[500MAG]

Finally got my 7.62x39 upper and wanted to get some info from anyone that is casting for the AR platform 7.62x39. I have both the 160 gr and 155 gr Lee molds. Thanks in advance .

[johnly]

I shoot a 155 gr. GC NEI mold with bullets sized to .313 in my Colt 7.62x39 upper. It has a red dot sight, but will still shoot 2MOA with this bullet using just enough 2400 to cycle the action.

John

[Harter66]

W/a case full of IMR4350 you should be able to get 1500-1800 out of a 200 gr cast boolit . I worked up an s k s w/a spire point that is more or less a fat 200gr 300 BO or Whisper boolit 22.0-22.5 would seat and feed in the magazine while 25.0 was a single feed option but gained 200 fps in the 22'' bbl.

[tyeo098]

Check out my thread 'Well this should be interesting' I'm loading the 155gr'ers with 16 or so grs of Rel7.