Need RCBS Lubsizer Part numbers to match my Lee mold

[Wildcat66]

Picking up a new Glock 23 this week and am putting together the parts to start casting
for the 40 S&W.

Will be using the Lee 6 cavity mold 401-175-TC

Need to know the part numbers for the sizing die and top punch to fit my RCBS Lubesizer.

Thanks for your help guys!!

Nick
West Virginia

[cheese1566]

Unsure on the sizing die... every gun is different. I use a .401"

I dont use any special top punches. Majority of my pistol boolits are flat nose (like you 401-175-TC) so if I am using my RCBS luber, I use a top punch that has had the cavity filled in with 5 minute epoxy. (I did this also with my seating stems in my pistol dies.)

[high standard 40]

Check here.

http://www.castpics.net/subsite/TopPunches/default.html

But I too use a flat punch whenever possible. I bought a set from Accurate molds.