Greg
07-23-2013, 08:29 AM
I need the following dimensions from a .410 MEC reloader;
Depriming Punch:
main diameter _______, minor diameter just above the primer punch ________,
and the transition length ______ between the main diameter and the actual punch. along with the basic shape…rounded, concave, straight taper or ?
I know that the primer punch itself is .190 at @ .625 long with a chamfered tip.
Repriming Punch:
main diameter _______, minor diameter just above the end of repriming punch ________, especially it’s length ________and the transition length ______ between the two. along with the basic shape…straight taper or just straight?
I’m trying to put together an economical .410 handloading kit for a young friend, and a few pertinent dimensions I couldn’t guess at.
Thanks in advance for your help…
Depriming Punch:
main diameter _______, minor diameter just above the primer punch ________,
and the transition length ______ between the main diameter and the actual punch. along with the basic shape…rounded, concave, straight taper or ?
I know that the primer punch itself is .190 at @ .625 long with a chamfered tip.
Repriming Punch:
main diameter _______, minor diameter just above the end of repriming punch ________, especially it’s length ________and the transition length ______ between the two. along with the basic shape…straight taper or just straight?
I’m trying to put together an economical .410 handloading kit for a young friend, and a few pertinent dimensions I couldn’t guess at.
Thanks in advance for your help…