105 Gr. Lee six cavity mold.

[45-70 Chevroner]

I am thinking about getting one of these. I think I have read some info on here about this boolit. I haven't been able to find it though. What do y'all think about this boolit in the 38 special. I am thinking it would be a great plinking slug out to 25 yards or so. I see there are a lot of loads for it but what are some of your favorites. I am inclined to use Bullseye, Unique, or 231.

[beppe]

I have tried this boolit in the 9x21 imi glock 17 loaded with 4.5 grs of imr 700x, 25 meters is very precise. I love it and I also bought the mold with 6 cavities.

io ho provato questo boolit sul 9x21 imi in glock 17 , caricato con 4.5 grs di imr 700x ,a 25 metri è molto preciso .mi piace molto e ho comprato anche lo stampo con 6 cavità .

[beppe]

this is my test, for 357 May do not really like.


questa è la mia prova , per 357 mag non mi piace molto .75031

[Artful]

I use this boolit in 380, 9x19 Luger, 38 spcl, 357 mag and 358 wcf - has always wanted to shoot well for me. I'd say buy one.

http://leeprecision.net/support/index.php?/Knowledgebase/Article/View/377/3/online-lee-distributors

Several have it in stock but watch the shipping costs :groner:

[gunoil]

Comes in 2 cavity i think.

[45-70 Chevroner]

Comes in 2 cavity i think.

Listed as being available in 6 cavity also.
I will be ordering one in 6 cavity.

Thanks guys for making up my mind.

[Finster101]

Here is a good link.

http://castboolits.gunloads.com/showthread.php?105996-Lee-105-SWC-load-data


I use this boolit in several 9mm pistols and 1 carbine. Works real well. Get the 6 banger.

[gunoil]

yea, i was thinkin bout that 102 RN.

[Idz]

Only problem I've had with the six cavity 358-105-swc is that as it gets hot the sprue cutter seems to warp a bit and it casts a bit of flash on the base. It works great with the Lee pro 4-20 pot because you can set the guide bar so you don't have to hold the full mold weight while you're casting.