Why do I need such FAT 45-70 boolits?

[Walstr]

My Marlin slugged .459"-.4595", so I figure I'll need .461" boolits...my Lyman is dropping about .461" into hot water, but not quite perfectly cylindrical. Problem is, no .461" sizing dies available; Lee offers .457" max. Anyone have to modify/ream a die for similar purpose? ..or does my rifle use the fatest boolits ever?

[Jailer]

Contact Buckshot here on the forum he can make you one.

[John Boy]

my Lyman is dropping about .461" into hot water, but not quite perfectly cylindrical. The only cast bullets that have a perfect diameter base are those that are swaged! No mold cavities are perfect. Load them up and shoot them, they are lead not titanium and with obturate

[dilly]

I understand the benefits of uniformity in sizing, but if you have a mold that's dropping the size you need sometimes shooting as cast is an option. You may decide you need more consistency than that, but just throwing it out there. You could always load up a test batch and see if their performance surprises you.

[joec]

I got a .458 sizing die (same as Lee's) for about the same price from a guy named Rick Turnell and very well be Buckshot here not sure as I was given his name by Ranch Dog some time ago. He did a great job for me on the sizing die as well as a powder compressor for my 12 ga brass shot shells using the RCBS cowboy dies. The powder compress simply screws in to the top of the die and once set to the right depth does the job perfectly.

[Maven]

joe, Rick TUNELL (no r) = Buckshot and his workmanship is excellent!

[fredj338]

I have had sizing dies opened up & Lee will make you any size you want for a bit more money. You can [probably make a 0.460" work.

[Spokerider]

Use a Lee sizer and make it .461 with sandpaper wrapped around a drill bit, or similar item. A drill with the diameter as close to the .457 lee sizer plus paper, works best. Use water or oil when sanding. Yes, it takes elbow grease. Slug the sizer with a boolit often, use finer paper as you get close to target diameter.
This worked for me.

[catboat]

Try pan lubing them, and shooting "as cast". You may find it works just fine.

[oldfart1956]

Track of The Wolf sells the Lee push-thru sizer in .460. Don't know if they're in stock right now. Opening one up to .461 takes about 10 minutes. Audie...the Oldfart..

[Tatume]

joe, Rick TUNELL (no r) = Buckshot and his workmanship is excellent!

+1

I've been very pleased with his workmanship.

Take care, Tom

[ku4hx]

Use a Lee sizer and make it .461 with sandpaper wrapped around a drill bit, or similar item. A drill with the diameter as close to the .457 lee sizer plus paper, works best. Use water or oil when sanding. Yes, it takes elbow grease. Slug the sizer with a boolit often, use finer paper as you get close to target diameter.
This worked for me.

This ...

[CPL Lou]

Here is an option if you prefer Lee sizes.
http://www.trackofthewolf.com/Categories/PartDetail.aspx/1193/3/LEE-SIZE-460

CPL Lou