PDA

View Full Version : Hand tools, maybe not all casting?



Buckshot
09-17-2007, 10:34 PM
http://www.fototime.com/820D61686DA0E42/standard.jpg

A pound swage set I made when I got my mill-lathe combo back about 1998. The 2 Minie' bullets on the outside are the before, and the 2 inside ones are the result. Setup also works in a hydraulic bench press.

http://www.fototime.com/2814C9B404C7122/standard.jpg

De- and re-capping tools for 32 ga shotshells converted to 209 primers from Berdans.

http://www.fototime.com/D7DD6B64206AB1A/standard.jpg

Berdan primer pocket swage tools for conversion to LP primers.

..............Buckshot

MtGun44
09-23-2007, 11:03 PM
Great ideas! There's not much a man can't do with a mill a
lathe and some imagination. Looks to me like you're having
a lot of fun. :)

Bill

Lead melter
09-24-2007, 06:47 AM
Well, thank the Lord there are still some folks out there who know how to do-it-yourself. Met a young employee of a Wendy's on Friday. She asked me for the time, I showed her my watch, and she said she didn't know how to read the kind of watch [analog style]. Not much hope of her becoming president of any major corporation. But, I seem to have gotten off the point. It looks like that Berdan primer reamer set-up is made for a handgun/pistol case. Do you reckon it could be made to work in bottleneck rifle brass. I'm working on a cast boolit load for 7.62X54R and reloadable brass is as rare as a 4-point unicorn. Any info would be helpful, or blast off a PM. Thanks a bunch

Buckshot
09-27-2007, 11:40 PM
Well, thank the Lord there are still some folks out there who know how to do-it-yourself. Met a young employee of a Wendy's on Friday. She asked me for the time, I showed her my watch, and she said she didn't know how to read the kind of watch [analog style]. Not much hope of her becoming president of any major corporation. But, I seem to have gotten off the point. It looks like that Berdan primer reamer set-up is made for a handgun/pistol case. Do you reckon it could be made to work in bottleneck rifle brass. I'm working on a cast boolit load for 7.62X54R and reloadable brass is as rare as a 4-point unicorn. Any info would be helpful, or blast off a PM. Thanks a bunch

...........Sure it could be made for a BN case. However, Graf & Son has it in stock:

GRAF BRASS 7.62x54R UNPRIMED PER 100
Item Number: GRU762X54R · Availability: In stock
Quantity: 100 $33.99

..............Buckshot

Lead melter
09-30-2007, 12:58 PM
Thanks boss, I'll cut them a check ASAP!