410 Shotgun Die set??

[Jeff.L]

Anyone have any experance with the CH 4D 410 Die sets? Was wondering if plastic shells could also be loaded with them.
only shoot a few 410s but like being able to reload for them..
Thanks
Jeff

[FLHTC]

Probably cheaper in the long run to get a MEC 600 JR in 410

[Norbrat]

Here's a way to do it without a die set or a press. http://forums.outdoorsdirectory.com/showthread.php/112231-Reloading-410-shotshells-without-a-press

[jmort]

There are options that are inexpensive for plastic and brass
http://zoned.fortunecity.ws/about.html
http://www.pacotools.com/tool_discriptions

[Jeff.L]

Thanks Guys for the information
jeff

[Iowa Fox]

Probably cheaper in the long run to get a MEC 600 JR in 410

I started with the Lee loader. Keep your eyes pealed for a used MEC 600 JR. as they are the best way to go now matter how few you might load. I know several guys that bought new ones when they were selling for 50 some bucks and didn't take the time to learn how to use them. They would encounter shot bridging in the drop tube and give up and get rid of the loader.

[Jeff.L]

I had a MEC 650 in 410 sold my 410 sold the 650 bought another 410 now I have no Loader... Guess I'll be on the look out for another
410 MEC loader. Would love a size master.... Thanks Jeff

[Swede44mag]

I bought a Sizemaster in 12ga the loaded shells kept jamming in my Browning Light twelve until
I put them through a Mec shell plate and found out they would not fit.
I adjusted the Sizemaster down enough for the shells to fit the Mec shell plate now they work great.
Problem is I have not been bird or rabbit hunting in over ten years since the price of gas got so high.
Good luck with the Mec 650 loader I bought one year’s ago that was missing parts cheap and bought a set of 410 dies to fit.
Works great but shells will buckle real easy while trying to crimp them.

Been thinking on buying some 410 solid brass shells for my single shot H&R