New item up for site benefit donation...

[madcaster]

I just bought a Ideal #429421,HOLLOW POINT SC mould for $20.00 WITH handles.I thought that Ideal HP moulds like this should be #429431,but it is 421,and the thing does NOT look like it had been bubbaed to a HP mould,so i think it is all factory....
I hereby am listing this as a site benefit auction.I will post -or get some help posting a picture here soon.
I appreciate everyone's business over the last few days.
I will start the bids out at $50.00[smilie=1: [smilie=1: [smilie=1: [smilie=1: [smilie=1:
LETS Roll on it fellas!!![smilie=w:

[45nut]

Thanks again for the support!

http://img.photobucket.com/albums/1003/45nut/Ideal429421HP005.jpg

http://img.photobucket.com/albums/1003/45nut/Ideal429421HP010.jpg

[Gunload Master]

Thanks Madcaster!

[floodgate]

Madcaster:

Lyman has listed this mould both ways - #429421HP AND #429431 - over the years.

I'll up the bidding to $60.00.

Just to follow up on a discussion from last winter, is there a tiny number stamped on the metal collar of the HP pin, and a matching number on the left side of the block, upper front corner? Most "IDEAL"-stamped moulds (but not all) have this number, to match the pin to the blocks - a sure sign of an original set. I have also seen this match numbering on one or two "LYMAN"-marked (1968 or later) HP / HB moulds, but it seems to have been dropped shortly after Leisure Products took over Lyman.

floodgate

[GLL]

I will go $65.00 and add my thanks for madcaster's generosity.

Jeff:

Could we see a photo of the mould face to get an idea of bullet profile on this particlar version of the 429421?

Jerry

[madcaster]

Hokay Jerry,I will send it to 45nut,and maybe he will kindly post it for us.
Jeff

[45nut]

http://img.photobucket.com/albums/1003/45nut/Ideal429421HP008.jpg

http://img.photobucket.com/albums/1003/45nut/Ideal429421HP011.jpg

http://img.photobucket.com/albums/1003/45nut/Ideal429421HPII001.jpg

http://img.photobucket.com/albums/1003/45nut/Ideal429421HPII002.jpg



Thats about all I have ...

[madcaster]

By the way,let's run this until September 12th,kinda get maximum bids and exposure!

[JudgeBAC]

I'll go $70.00

[madcaster]

Thank you SIR!!!
Ya'll remember,this IS A SITE BENEFIT item,I pay shipping to the winning bidder after it closes and the site owner recieves payment.
Remember how much EBay bidders pushed these things up?I do not think that will happen,but a good site deserves our support for all the information and help.So just bid what you are comfortable with!
Thanks Ya'll,
Jeff.

[madcaster]

BTT for a good mould....

[madcaster]

C'mon guys,I donated this so as I would'nt have to cast one at a time,any more bidding to be done???

[madcaster]

This one ends WEDNESDAY!!!That's in less than 24 hours!!!

[floodgate]

Jeff:

What the hey: $75.

floodgate

[JudgeBAC]

$80.00

[madcaster]

Thanks Floodgate and JudgeBAC,the winner's cash will help the site!

[JudgeBAC]

I am assuming that the auction will end at midnight EST?

[madcaster]

Sounds good by me,so be it.12:00 Midnight TONIGHT,EST....

[madcaster]

JudgeBAC,
Looks like you have won this item at $80.00!
THANK YOU for the support to the site.
Once the Siteowner lets me know that payment has been recieved then I will ship this out to you Sir.
Please PM me with your mailing adress.
Thanks to all who participated!

[45nut]

Thanks to Jeff Again! And thanks JudgeBAC!

[Gunload Master]

Thanks for the support!!!

[madcaster]

You are most welcome!

[Gunload Master]

I have recieved the Funds, I'd like to thank Madcaster and JudgeBAC for all the help! You guys are the best!

[JudgeBAC]

Thank you, I have cleaned it up and its ready to go; can't wait to try it out.