Problems with my Saeco Model 24

[BobW.]

My Saeco #24 has recently become a "dripper". Today I emptied the pot and removed the "plug". I can carefully polish the plug but need a bit of help with the "spout". Right now it is clogged with a bit of lead and crud. I need some advice on how best to clean the crud that is blocking the spout. Thanks in advance..............

[billyb]

Use propane torch to heat the spout to melt out the lead and crud. Then use a metal rod close to the diameter of the hole and run it into the hole, or use a drill bit to open up the hole.

[BobW.]

Thanks billyb, my "dripper" is no more....................