Any one load and shoot cast in the Walther PK380??

[coaldust]

I am waiting for my PK380 to arrive and wondered what would be a good bullet and load for this pistol.

[Iron Mike Golf]

I have a PK380 and Sig P238. I am working on a load that shoots well in both. I am using the Mihec 95 gr HP mold. Powders are HP-38, Power Pistol, and HS-6. I have loads for each that shoot well in the P238. I need some more testing in the PK380, but all three look promising.

For jacketed, the Montana Gold 95 gr JHP over 3.1 gr Titegroup works well in both guns.

[bowenrd]

5 different .380's shoot cast well. I am using a RCBS .38-90-RN P/N 82057

[rintinglen]

There is an on-going group buy for a custom Lee Mold in the Ranch Dog 358-100 design that I would heartily recommend. I have that mold from the days when Ranch Dog was running his business and I have had excellent results using WW-231, Unique and Bullseye. I have not used it in a PK 380, but it has worked just fine in a Beretta 84, a Walther PPKs and a Ruger LCP.

[fcvan]

Walther PK380, FEG PA63, Walther PPK, Beretta M70, Beretta M84, Browning BDA, and Taurus TCP738. Each of these .380 pistols easily digested the Lee 356-102 1R and the 358-105 SWC loaded with 3 grains of Bullseye. I have been shooting those loads for over 25 years. A year or so ago, I tried a load with Unique - wasn't happy and went back to Bullseye. My wife loved the 105 SWC in her PK380. BTW, I size to .358 using range scrap. The 102 actually weighs 105 and the 105 goes closer to 108. I load the 102 1R more than the 105, just because I tend to cast more of them.

[Tbird]

I use lee 356-102 casts at 105..2.3 titegroup..shoots good in ppks 380